CC3D Openpilot Open Source UAV Flight Controller 32 bits processor for RC models
Introduction:
OpenPilot is a next generation open source UAV autopilot. It is a very capable platform for multi-rotor craft, helicopters, as well as fixed wing aircraft. It was built from the ground up
Community of passionate developers from around the world, with their core design principles
Quality, safety and ease of use. Simplicity also comes with no compromises: without hard-coded settings, a complete flight plan scripting language, and other powerful features.
OpenPilot is an extremely powerful UAV autopilot platform.
Lierferumfang:
1xCC3D flight controller
1x8p wire rod
2x4p expansion path
]]>
This is a light unassembled frame for those who like to mod. With pure carbon fibre plates and arms,this is an amazing frame, very stiff and well machined.
It has a party trick that nothing else of this size has .... it folds for travel etc..
Will happily take a 6 inch prop with some room to spare.It's ripe for a v tail conversion. Hope you have a conversion kit available soon
With rubber damper to decrease vibration during flight for camera, this plate can be mounted on the top or bottom.Aluminum alloy spacer, light weight, reliable
Specification:
Main Material: Carbon Fibre
Dimension: 260*240*98mm
Weight: 172g
Thickness of Frame arm：3mm
Thickness of Frame Upper/Lower Board：2mm
Aperture of Frame Arm: 6.8mm
Recommended Configuration(Not included):
Motor: EMAX MT2204
ESC: EMAX Simon 12A ESC
Propeller: 5"-6" propeller.
Product package:
1.Horizontal mounted camera Lens holder 1（PCS)
2.Front mounted camera Lens holder 1（PCS)
3.Frame arms for installing motors in the bottom 2（PCS）
4.Frame arms for installing motors on top 2（PCS）
5.Frame upper board 1（PCS）
6.Frame lower board 1（PCS）
7.Frame auxiliary upper board 1（PCS)
8.Frame auxiliary lower board 1（PCS
9.H47.4 Aluminum post 4（PCS）
10.H42.9 Aluminum post 4（PCS）
11.H3 Aluminum post 6（PCS
12.Landing gear 1（PCS
13.Screw M2*5.5 17（PCS）
14.Rubber shock absorption ball 6（PCS）
15.M3 self-locking nut 14（PCS）
16.M2.5Nut 3（PCS）
17.Screw M3*12 14（PCS）
18.Screw M3*8 17（PCS）
19.Screw M3*6 17（PCS）
20.Screw M2.5*15 2（PCS）
21.Screw M2.5*10 2（PCS）
22. Nylon screw M3x6mm 5（PCS)
23. Inner Six angle wrench(1.5/2.0) 2（PCS）
24. CC3D hub board 1（PCS）
25. Power cord: 1pc
26. Buckle fastener: 10 pcs
27. Velcro straps: 1pc
28. Shrink tube: 1pc
]]>
Feature
100% Brand New
2 Pcs 1147 Carbon Fiber CW CCW Propeller Props for Quad Multi-Copter
Packages
2 pcs AGM propellers
]]>
AGM 250 Quadcopter Frame Kit
- Unassembled This is a Mini 250 size FPV quadcopter frame kit, it's a stable system of flight for smooth flight. And it is very good for new starters, also suit for senior player to professional DIY.
Specifications:
250mm Carbon Fiber Mini Quadcopter Multicopter Frame Kit
Arm plate thickness: 3mm
Frame upper/lower board thickness: 1.5mm
Frame center board thickness: 2mm
Main material: Carbon fiber
Weight: 220g
Complete copter size: 240*225*74mm
With rubber damper to decrease vibration during flight.
light weight, reliable.
Recommended Configuration(Not included):
Propeller: 5030/6030 Carbon Fiber
Motor: MT2204
ESC: 12A-15A
Battery: 1500mah
]]>